TD408 four in eight out audio processor
ꄴPrevious:
ꄲNext: T series professional power amplifier
Four input and eight output audio processor. This 4-in 8-out speaker processor uses the latest fourth-generation SHARC ADSP-21488 400Mhz floating-point DSP, which has powerful DSP processing capabilities. Each input and output has 16 parametric filters, gain control, noise gate function, RMS pressure limit, built-in pink/white noise generator, and adjustable delay. The slope of the frequency divider is selectable from 6dB/Oct to 48dB/Oct. The delay step accuracy is 0.02ms, and the level gain accuracy is 0.1dBu, which meets fine adjustment on site.
ØADSP-21488 400Mhz floating-point DSP
ØAD-DA dynamic range 114dBu ØSystem
dynamic range 110dBu ØInput
16-segment PEQ, output 16-segment PEQ ØEach
input channel contains a noise gate ØEach
input channel has a feedback suppressor
ØEach input channel With compressor
Ø100M Ethernet interface
ØPC software automatically discovers processor Ø32
kinds of system presets ØQuick
copy of channel parameters ØDSP
, ARM firmware can be upgraded through Ethernet
Maximum input level 18dBu
Maximum output level 18dBu
Default output level 0dBu
harmonic Wave distortion THD+N <0.003%; 1kHz@+4dBu
<0.0035%; 1kHz@+10dBm
<0.0035%; 20Hz~20kHz@+4dBu
Frequency response 20Hz-20kHz, +/-0.2dB
Input to output dynamic range 110dB (no Weighted)
SNR -110dB (non-weighted
ADC dynamic range CS5361 114dB
DAC dynamic range CS4382A 114dB
DSP 400Mhz floating point SHARC ADSP-21488
sampling frequency 48K
quantization 24Bit
mode storage 32
control mode 100M Ethernet
control software language English/Chinese
Noise Gate Yes,
Feedback Suppressor Yes,
Signal Generator Yes,
Compressor, Front and Back Independent 12
Delayer Outputs 1-4 218ms
Output 5-8 168ms
PEQ
Low Shelf
High Shelf Front and Back Independent 16-segment
High Pass/Low Pass
Bessel
Butterworth
Link-Riley A total of 12 front and rear independent
-6dB/oct
-12dB/oct
-18dB/oct
-24dB/oct
Copyright @2023 tactsound.com 版权所有 粤ICP备16015464号